Emulson and Exposure unit
Posted: Fri Feb 16, 2018 1:33 am
Hey Everyone,
I couldn't find a more appropriate thread to post my question to, I hope it doesn't fall too off-topic here.
We are currently using this emulsion: http://www.fotec.ch/wp-content/uploads/ ... 019_en.pdf, and expose our screens to an old UV lamp, that I can't give much specs about.
The problem is that, due to moving we can no longer use this old 3-phase lamp, and we will have to switch to a mono-phase exposure unit.
So the question is: will the above mentioned emulsion stiffen to the light emitted by this device: https://www.youtube.com/watch?v=m3Wyrva0bSk?
I know it is not a conventional type of lamp, but I'm curios if it would work?
Any help or suggestion would be welcome!
Thanks, in advance,
Barni
I couldn't find a more appropriate thread to post my question to, I hope it doesn't fall too off-topic here.
We are currently using this emulsion: http://www.fotec.ch/wp-content/uploads/ ... 019_en.pdf, and expose our screens to an old UV lamp, that I can't give much specs about.
The problem is that, due to moving we can no longer use this old 3-phase lamp, and we will have to switch to a mono-phase exposure unit.
So the question is: will the above mentioned emulsion stiffen to the light emitted by this device: https://www.youtube.com/watch?v=m3Wyrva0bSk?
I know it is not a conventional type of lamp, but I'm curios if it would work?
Any help or suggestion would be welcome!
Thanks, in advance,
Barni