Hello, I've found that the other forums are not mush help. I hope this one can!
I finally got my butt-butt reg figured out but cant figure out the best way to print a transfer wet on wet. I cut my teeth with a 2 color black and white cold peal on a red shirt. I tried to print most of them wet on wet printing white first. The problem I found was a lot of ink was sticking to the black screen. About every 5 prints I would have to clean off the black screen.
I have read to use silicone spray on the back of the second/black screen, however; I don't have access to that where I live.
Does anyone out there print wet on wet plastisol transfers and have tips for sticking ink?
Thanks
RK
Printing wet on wet plastisol transfers
Moderator: Moderator Team