I am getting to the point where I need to either re-mesh some of my screens or buy new one's. I currently use aluminum screens and generally use between 110-180 mesh count.
My question is, is it advantageous to keep buying new screens or to re-mesh the one's I currently have.
Also, please educate me on the re-meshing process. I know screen printing supply companies offer re-meshing services but is it possible to do it yourself? If so, what exactly is needed to take on this job? Screen tensioner, Glue, Mesh, ECT?
Thanks in advance,
Matt
Screen Re-meshing Question
Moderator: Moderator Team
- yaleteamsandtees
- Administrator
- Posts: 145
- Joined: Thu May 18, 2006 11:00 am
- Location: Gaithersburg, Maryland
-
- Intern
- Posts: 46
- Joined: Fri Aug 18, 2006 11:00 am
- Location: Wooster, Ohio
- Contact:
The price of aluminum screens is actually pretty low if you know where to find them. I purchased mine through a company out of New Jersey called equipment zone. Their prices are pretty low for the frames.
If you wanted to rescreen yours, you could buy a larger newman roller frame, tighten the mesh to 25 newtons or more and then place your frame under the newman roller frame and glue the mesh on that way. Once it's dry, cut it out. You will use a little more mesh this way, but the proper way is to have a screen stretcher and those are not cheap.
If you wanted to rescreen yours, you could buy a larger newman roller frame, tighten the mesh to 25 newtons or more and then place your frame under the newman roller frame and glue the mesh on that way. Once it's dry, cut it out. You will use a little more mesh this way, but the proper way is to have a screen stretcher and those are not cheap.
Melray.com, tubelite, just to name two. Personally I find it less costly to purchase prestretched frames or send out frames to be restretched and I have stretched many many frames myself in the past. If you are not a volume purchaser of screen mesh it can be very expensive. Companies that stretch frames all day as a business have more buying power and can stretch your frames at much less cost. Melray does a good job of that at a very reasonable price. By the time you buy the tools and mesh to do it yourself you can find yourself spending a good little stack of $$$. The time you spend stretching frames can be spent printing and making money rather than spending it. Every minute of the day you are not putting ink on product you are losing $$$.