Page 1 of 1

Exposure issues

Posted: Thu Apr 14, 2011 9:59 pm
by PizzaBrainzz
Hey dudes, and dudettes. I'm sure this is a common issue and I have already tried using the search feature but apparently everything I try to search is "too common." So sorry in advance.

I'm doing DIY screen printing and have run into an issue. The image I'm trying to burn right now is a word that has a thin outline around the bubbled letters. I usually expose my images for around 15-20 mins and I get pretty decent results. Well I have exposed said image up to 30 mins now and have beautiful results with the bold letters after the wash but the outlines are not coming through. I'm using 4, 12" flourecent bulbs in my exposure unit, one coat of Diazo Speedball emulsion (i've tried front and back and it was worse.) I am ink jet printing my bold black image onto transparency film and am exposing for 30 mins. It seems like the longer the exposure time the better but I am worried about over exposing. Any ideas?? :?


Oh and one more thing..
When I go into my room to pull my screen from the drying cabinet to put it on the exposure unit, im basically doing it in complete pitch darkness. Is there any form of light that's safe to use so I can see what I'm doing and not expose my screen?

Re: Exposure issues

Posted: Fri Apr 15, 2011 4:23 am
by tompaine
You can use safe lights, if you can get some amberlith you can wrap it around a fluorescent light.
You don't mention a vacuum unit, it really is important to get good contact with the screen if you are burning fine detail.
http://www.positivityltd.co.uk/Tutorial ... osure.html

Re: Exposure issues

Posted: Fri Apr 15, 2011 2:12 pm
by PizzaBrainzz
oops, I meant I'm using 4, 24" bulbs lolzz
also any enLIGHTenment on the lighting to use in the dark room while coating screens?

Re: Exposure issues

Posted: Thu Apr 21, 2011 2:35 pm
by ckepley
How long have you been burning images with the exposure unit? If you are doing longer burn times it sounds like you may have to replace the lights here soon. I have a exposure unit and the burn times are only between 5-6 minutes. Mine however is new so that's why I ask....

Also if you go ryonet's website and type in your questions there you can normally get good results or you can get the information your looking for off you tube videos. Those seem to answer a lot of my questions when I have issues.

Casey

Re: Exposure issues

Posted: Wed Jan 11, 2012 5:58 pm
by Doug bringer
i'm sorry i'm cheap i use yellow bugs lights i think they are 60 watts so far they are working also are you using any type of glass as a weight