Javelin Indexing problem HELP!

Post your questions, suggestions, ideas and advice to issues you have run into in your screen printing shop.

Moderator: Moderator Team

Post Reply
Mikethemonkeyman
Just Browsing
Just Browsing
Posts: 2
Joined: Thu Jun 24, 2010 3:34 pm

Javelin Indexing problem HELP!

Post by Mikethemonkeyman »

I recently started having problems with my javelin, when the table lifts while in production it hits the forks and cant lift all the way. I can't seem to find anyway to resolve this, I've leveled the press, leveled all the forks, adjusted the block in line with the forks(not exactly sure what its called holds the pallets in line with the screens before production), and tried to adjust the index but it seems im 1/2 in short on every fork with the index engaged. There is no more room for the index to go further unless the bumper can be moved back. As far as I can tell nothing is bent/broken. Ive also tried moving the arms for the print heads, but still come up short. Theres got to be something that Im missing.

Thanks,
Mike
Post Reply